This is a 2 gallon (7.5 Liter) kit. You will receive (1) gallon of resin and (1) gallon of hardener.
Ice Thin Bar and Table Top Epoxy is an easy–to–use, two-part epoxy tabletop finish. It can be tinted with powdered or liquid pigments. Our tabletop epoxy is perfect for clear-coating surfaces like tables, bar tops, concrete, artwork, and more. It also is perfect for beginners wanting to attempt a river table. When used as a coating it self levels to about 1/8" with a rich clear gloss. Additional layers can be added after 24 hours at a minimum of 75°F. For river tables it can be poured between 1/4" and 3/8" thick depending on volume and temperature.
For the best results, expect a 30-min working time at 75˚F. After 24 hours from pouring and spreading, your epoxy tabletop finish is sandable at 75˚F.
Once measured in the proper 1:1 ratio, stir until well combined. It should be crystal clear and free of striations before pouring. We don't recommend using a paddle mixer with this epoxy as it will be near impossible to remove all the bubbles before it starts to set up. Make sure the sides and bottom are continually scrapped to avoid unmixed resin ruining your project.
Casting less than 1 inch
• Ratio 1A:1B
• UV Resistant
• 100% solids
• Low VOC content and low odour
• Crystal clear and high gloss appearance
• Magnifies object appearance
• Resistant to bacteria and moisture
• Excellent air release qualities
• Will not distort with age