Bar and Table Top Resin

Bar and Table Top Resin

Regular price
$140.00
Sale price
$140.00

This is a 2 gallon (7.5 Liter) kit. You will receive (1) gallon of resin and (1) gallon of hardener.

Phoenix Bar and Table Top Epoxy is an easytouse, twopart epoxy table top finish. It can be tinted with powdered or liquid pigments.

 Our table top epoxy is perfect for clear-coating surfaces like tables, bar tops, concrete, artwork and more. It also is perfect for beginners wanting to attempt a river table. When used as a coating it self levels to about 1/8" with a rich clear gloss. Additional layers can be added after 24 hours at a minimum of 75°F. For river tables it can be poured between 1/4" and 3/8" thick depending on volume and temperature.

Working Conditions:

For the best results, expect a 30-min working time at 75˚F. After 24 hours from pouring and spreading, your epoxy table top finish is sandable at 75˚F.

Mixing:


Once measured in the proper 1:1 ratio, stir until well combined. It should be crystal clear and free of striations before pouring. We don't recommend using a paddle mixer with this epoxy as it will be near impossible to remove all the bubbles before it starts to set up. Make sure the sides and bottom are continually scrapped to avoid unmixed resin ruining your project.